Please view "Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 TMat-2014-13-4-Larbalestier-Isotropic round-wire" published by NATURE MATERIAL 3887, 9 MARCH 2014, in which an STR-High-Pressure furnace was used.

OTF-1200X-HP-III-80-GF is a high-pressure tube furnace with three heating zones and gas flow control system as well as a protective frame. The processing tube is made of Ni-based superalloy with 50 mm ID, which can be heated to max.1100℃under high-pressure of both oxygen and inert gases with controlled flow rate. The furnace originally is designed for processing Fe-based superconductive material, also can be used for exploring new generation oxide ceramic as a compact HIP.

SPECIFICATIONS

Furnace	、Splitable Three heating zone tube furnace with air cooling layer 、High quality fibrous insulation and reflective coating for max. energy saving. 、Power: 208 - 240VAC 50/60Hz , 4KW max.
Heating Zone	、Three heating zones: 150mm + 150mm + 150 mm 、Total heating zone length： 450mm 、Constant temp. zone: 300mm ±5°C
Working Temperature	、1100℃max.for ＜ 1hr 、1000℃for continuous 、Heating rate: ≤10°C/min
Temperature Control	、Three precision digital temperature controller with 30 segments programmable 、PID control method with protection of over-temp. and thermal couple broken 、Temperature stability: ±1°C 、PC control software and laptop computer are included for PC operation
Thermocouple	?Omega 3mm OD K Typewith high-temperature (220°C) connector
Process Vessel amp;Safety Frame	、Pressure vessel is made of Nickel based superalloy GH747 (Click to download GH747 nickel based alloy datasheet) 、Vessel size: OD 85xID 50xLength 1000 (mm) 、Pressure vessel is located inside a steel frame to avoid flange flying out by accident ( see picture below ) and ensure a safe operation. 、Optional: torque wrench is available hereto avoid over-tighten the flange bolts. 、Warning: Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy.
Working Pressure vs. Working Temperatue	Pressure calculation based on safety factor 3. 、140 Bar max. at 800°C 、80 Bar max. at 900°C 、40 Bar max. at 1000°C 、2.5 Bar max. at 1100°C 、Never heat up above 1200°C
Working Gases	、Inert gas and oxygen 、No hydrogen or any flammable gas
Flange and Fitting	、Two CF type flanges are weld with female 1/4"NPT fitting to connect high-pressure tube 、2 pcs Copper o-rings are included ( spare copper O-ring is available as consumable ) 、One pair of water cooling ring , made of cupper tube , is installed on two ends of the tube ( gt; 10 liter / min water flow is required) 、One 16L/min flow rate recirculating water chilleris included as a cooling system to save water.
Gas Flow System	、Gas control system is built ina heavy duty mobile tableunder furnace and safety frame ?Three pressure sensors and digital displays are installed to monitor furnace pressure for gas inlet, inside tube and gas flow end separately ?One high-pressure mass flow controller is built in gas outlet to control gas flow rate with max. 10Mpa working pressure and 500 MCC flow rate laptop via included software for remote monitoring and controlling 、Three adjustable pressure release valves are installed to ensure safety. The valve will release gas when pressure reaches setting point.
Dimension amp; Weight	、Dimension: 1200 Lx600 Dx1540 H,mm （ includes furnace， pressure control table and safety frame 、Net weight: 180 kg
Operation Instruction
Compliance and Warranty	?All electric components ( gt;24V) are UL or MET listed, and ready to pass TUV, UL or CSA certificate on feild at extra cost ( click mark to learn what is ) 、One year limited warranty for lifetime support
Application Notes	?Hytort Application, or named Hydroretorting of Shale Oilis a process developed by IGT to double the yield of shale oil and hydrocarbon gases. STR-High-Pressure furnaces with Ni-based superalloy tube is an ideal tool for conducting related experiments. Please click underlined to view research paper.
Safety Notes	、Ni-based Superalloy ( Waspaloy or equivalent) is a reliable processing tube which can be used under high temperature and high pressure.. It has excellent ductility and tensile property so only creep deformation happens under overpressure destruction test and following by a crack formed (usually at the hot zone at the center of tube) to release the pressure. Brittle fracture won’t happen in the overpressure destruction test which means no tube explosion will happen under overpressure of inert gas or safe gas or under other accidents causing overpressure of inert gas or safe gas. Thepics show Ni-based Super-alloy processing tube under overpressure test 、Warning： Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy. 、Attention: For the use with flammable, toxic or corrosive gases, you must contact STR-engineering group for the consultation to know all the prerequisites and precautionary measures. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Please click here to learn how to install the gas regulator.
Optional Assessories	、To measure the electric properties of thermoelectric ceramics under high pressure amp; temperature conditions, please order alumina testing fixture and high pressure electrical feedthrough (10Mpa Max.) with the furnace (additional fee will apply).

STANDARD PACKAGE

P/N	Name	Qty
	Tube Furnace main machine amp; operation manual	1
	Processing vessel	1
	High pressure flange w/ positive pressure sonser	1
	Vacuum flange KF40 and KF25 connector
	1.5 meter long, 1/4" high pressure tubes are includedfor connecting to gas tank and gas-inlet furnace tube conflat flange for positive pressure or vacuum	2
EQ-KJ5000	Circulating water chiller
KF-Valve-D40	KF-40 right-angle valve	1
KF-Clamp-D40	KF-40 quick clamp	2
KF-Clamp-D25	KF-25 quick clamp	1
KF-BF25	KF-25 Blank flange fittings	1
ORing-Cu82	Oxygen-free copper gasket	3
FLG-kit-2	Furnace hook	1
	PC control software and interfaceand brand name Laptop computer	1

import(/layout/smh/menubottom.html);