熱搜關鍵詞： 高溫加熱爐智能馬弗爐三溫區高溫管式爐真空CVD系統

您的位置： 洛陽賽特瑞智能裝備有限公司首頁 > 高溫電爐系列 > Compact 5＂ Split Vacuum Furnace with Sealing Flanges(1200℃Max )OTF-1200X-S-5 -

Compact 5＂ Split Vacuum Furnace with Sealing Flanges(1200℃Max )OTF-1200X-S-5

產品型號：Compact 5＂ Split Vacuum Furnace with Sealing Flanges(1200℃Max )OTF-1200X-S-5

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：賽特瑞電爐

應用范圍：。

在線咨詢

全國熱線

產品簡介 / Introduction

Compact 5" Split Vacuum Furnace with Sealing Flanges ( 1200°C Max ) - OTF-1200X-S-5

Specification

Furnace Structure	Double layer steel structure.High purity Al2O3 fibrous insulation with Max. energy saving.High purity alumina coating on refractory ceramics for longer service life.This furnace can be converted into a vertical furnace upon request.
Power	3KW
Voltage	220VAC 50/60Hz
Max. Temperature	1200°C(＜1 hour)
Continuous Temperature	1000°C(continuous)
Max. Heating Rate	≤ 20 °C/min
Heating Zone Length	12 " (300mm), single zone.Constant Temperature Zone100 mm length (+/-1oC ): ( click drawing below for temp profile )140 mm length (+/-2oC ): ( click drawing below for temp profile )
Temperature ControllerUnit	PID automatic control via solid state relay with 30 steps programmable.Built-in Over Temperature and Thermocouple Failure Protection.Optional: The furnace may be operated by PC with installing a control module. Please order an MTS02-B control moduleat extra cost.
Advanced Temperature Controller (Optional)	Temperature control software kit (for YD518P series controllers) + 15" laptop package isavailable at the options bar. Click for the detail information about the software kit.You may upgrade the temperature controller to the Eurotherm 32H8 Temperature Controllerwhich is fully compatible with LabVIEW. This package includes a Eurotherm 32H8 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 32H8 temperature controller.
Temperature Accuracy	+/- 1°C
Heating Elements	Fe-Cr-Al Alloy doped by Mo
Tube Size	5" quartz tube (130mm O.Dx120mm I.Dx750mmL)is included. (Since 2016.11.08)Two fibrous ceramic tube blocks are included for blocking heat radiation from tube chamber. (Two Ceramic blocks must be fully inserted into the furnace chamber before heating)Quartz blocks (optional) are ideal for cleaner and higher vacuum efficiency. click here to choose a crucible
Vacuum Sealing Left Flange Right FlangeOptional Hinged Type Flange at extra cost	One pair of SS 304 vacuum flange with double high-temperature silicone O-ring is Included. (With support fixture) (click pic left for detail).KF25 port is built in right side flange to connect a vacuum pump.Vacuum gauge, gas inlet valve, and spare 1/4 thermal couple feedthrough are built in left side flange.Vacuumlevel can reach 10^-2torr (by a mechanical pump).
	Option 1：Water cooling 5" flange with Support Fixture, which allows the furnace to achieve MAX.1200℃(Pic 1)Option 2: Hinged type flange for easy sample loding( Pic 2-3, click pic 3 to order )Option 3: optional Quartz blocksand optional Quartz Boat are easy to build clean and high-vacuum system. Option 4 : A second temperature as a monitor can be added with additional cost applied. ( Pic 4) pic 1 Pic 2 pic 3pic 4
Fitting Portsamp;Optional Parts	You may need a vacuum valveat the vacuum portend ( click picture left to order ).You may click the pictures in below to order furnace with a vacuum pump and a temperature calibration kit.
Pressure Measurement / Monitoring	Standard mechanical vacuum gauge measures within a pressure range of -0.1 to 0.15Mpa is included.OPTIONAL:A gas-type independent (above 10mbar) digital vacuum gauge with a wide range between 3.8x10^-5to 1125 Torr. Aside from greater measurement precision, this gauge reduces risks of chamber explosionscaused by the incorrect reading of gas pressures due to gas-type dependency.
Optional Insertable Thermocouple	A K-type insertable thermocouple can be inserted through the flange to monitor the temperature inside the tube. Click the picture below to orderHeating furnace is available for spare and replacement ( click on the right most picture below).You may order flange support to avoid tube rotating ( click Pic below right )
Dimensions	Main furnace with lid closed: 440mm(L) × 440mm(D) × 460mm(H)With flange support (260mm each), total: 960mm(L) × 440mm(D) × 460mm(H) Main furnace with lid open : 440mm(L) × 440mm(D) × 700mm(H)With flange support (260mm each), total: 960mm(L) × 650mm(D) × 700mm(H)Temperature Controller Unit: 260mm(L) × 350mm(D) × 410mm(H)
Net Weight of Furnace	48 Kg
Shipping Weight amp; Dimensions	228 lbs; 48"x40"x37"
Warranty	One-year limited warranty with lifetime support (Consumable parts such as processing tubes and o-rings are not covered by the warranty, please order replacements at related products below.)
Laptop, software amp; WiFi Control(Optional)	Laptop, software amp; WiFi Control(Optional)Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. Temperature Control System (EQ-MTS01)enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces.A wireless remote control provides up to 300 meters operating range.Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.Note: The software is only compatible with Yudian Temperature Controller
Compliance	CE CertifiedNRTL or CSA certification is available upon request at the extra cost
Application Notes amp; Warning	Tube furnaces with quartz tubes are designed for using under vacuum and low pressure ＜ 0.2 bars / 3 psi / 0.02 MPa. Vacuum pressures may only be safely used up to 1000℃The flow rate for gases should be limited to＜200 SCCM (or 200ml/min) for reducing thermal shocks to the tube.Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator.How to set up a ceramic tube and vacuum flange for STR-tube furnaces.For safety, you may consider putting the small tube furnace inside a fume hood. ( click picture left to see )
Operation Instructions	Demo Video

import(/layout/smh/menubottom.html);