熱搜關鍵詞： 真空氣氛管式爐三溫區管式實驗爐 Double 高溫管式爐

您的位置： 洛陽賽特瑞智能裝備有限公司首頁 > 高溫電爐系列 > 1200℃Max Sliding Tube Furnace(80mm OD) with Flanges for Fast Heating / CoolingOTF-1200X-80-SL -

1200℃Max Sliding Tube Furnace(80mm OD) with Flanges for Fast Heating / CoolingOTF-1200X-80-SL

產品型號：1200℃Max Sliding Tube Furnace(80mm OD) with Flanges for Fast Heating / CoolingOTF-1200X-80-SL

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：賽特瑞電爐

應用范圍：。

在線咨詢

全國熱線

產品簡介 / Introduction

1200°C Max Sliding Tube Furnace (80mm OD) with Flanges for Fast Heating / Cooling - OTF-1200X-80-SL

OTF-1200X-80-SL is a CE certified amp; UL Ready slideable tube furnace with 3" IDx55" L Quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating,the furnace may bepre-heatedto the desired temperatureand then be slide to the sample's position. As for fastest cooling, the furnace can be slide to another side after sample heatingis completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gasses. This furnace provides an alternative for rapid thermal processingat the lowest cost.

SPECIFICATIONS

Furnace Structure

、Double layer steel structure with dual air cooling fans 、One pair of sliding rails are installed on the bottom of the furnace, which allows the furnace to bemanuallymoved from side to side 、Vacuum flanges and adigital vacuum gauge are installed for immediate use. 、Sliding rail length is about 1200mm, the furnace can slide 600 mm distance

Power

2.5KW

Voltage

AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

1200℃(＜1 hour)

Continuous Temperature

1100°C

Heatingamp; Cooling Rates

Heating Rate:15°C/sec (RT - 150°C);10°C/sec (150℃- 250°C); 7°C/sec (250℃- 350°C); 4°C/sec (350℃- 500°C); 3°C/sec (350℃- 550°C); 2°C/sec (550℃- 650°C); 1°C/sec (650℃- 800°C);0.5°C/sec (800℃- 1000°C);

Cooling Rate:15°C/sec (1000 - 950°C);10°C/sec (950℃- 900°C);7°C/sec (900℃- 850°C);4°C/sec (850℃- 750°C);2°C/sec (750℃- 600°C);1.5°C/sec (600℃- 500°C);1°C/sec (500℃- 400°C);0.5°C/sec (400℃- 300°C);

Note:The max heating and cooling rate is achieved by pre-heat one side of processing tube to the target temperature and then slide the furnace to the other side. You may choose to place the sample in the pre-heat area or not.

Heating Zone Length

440mm ( single zone )

Constant Temperature Zone

120mm (+/-1°C 400-1200°C)

Heating Elements

Fe-Cr-Al Alloy doped by Mo

Processing Tube Size

High purity fused quartz tube

O.D. : 3.2" (80 mm)I.D. : 3.0" (75 mm)Length: 55" (1400 mm)

Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring

Temperature Controller

、PID automatic control with 30 programmable segments for precise controlof heating rate, cooling rate and dwell time. 、Built-in over temperature alarm and protection allows for operation without an attendant. 、Two K-type thermal couples are included. One is built in the furnace to control furnace temperature, and another inserted into the tube to monitor sample real temperature profile. 、One NIST certified thermometer is included to connect to the thermal couple inside the tube. the meter hasRS232 Interface with Windows Software which can record temperature profile by PC. 、PC control moduleis included. 、Advanced Temperature Control (Optional) o Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the software kit. o You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm 3504 temperature controller. o

Temperature Accuracy

+/ - 1°C

Vacuum Flanges

、Stainless steel vacuum flanges are installed on both ends of the tube with heavy duty support. o Right flange: KF-25 pump connector and needle valve. o Left flange:one needle valve and 1/4" thermocouple feed-through anddigital vacuum gauge. o An 24" length x1/4" Dia. K type thermocouple (included) connected to an Omega temperature calibrator (included) will be inserted through this flange tomonitor the heating and cooling rates ofthe sample's position during furnace sliding. 、Click pictures below to see details:


Right Flange	Left Flange	Temp. Calibrator	24" K-type T/C	Digital Vacuum Gauge

Vacuum Level

、Limited by the pump ( pump is not included, click on pictures to order ) o 10E-5 torr can be reached by the molecular pump o 10E-2 torr by a mechanical pump.

Sliding Rails / Table

、Double sliding rail made by Cr-plated steel

、Sliding length: 1200 mm 、One slide stopping clamp is included for holding the position of the furnace.

Dimensions

?550x380x520 mm ( furnace only)

?1500x380x620 mm ( furnace + sliding )

Net Weight

~ 100 Kg

ShippingPackage Size

60"x40"x45" (inch)

Shipping Weight

305 lbs

Warranty

One year limited manufacturer's warranty(Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below).

Laptop, software amp; WiFi Control(Optional)

、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ-MTS01)enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information. 、Note: The software is only compatible with Yudian Temperature Controller

Compliance

、CE Certified 、NRTL or CSA certification is available upon request at extra cost. （ please click marks below to learn details )

Application NotesClick here to learnthe installation of a gas regulator

、Tube furnaces with quartz tubes are designed for use under vacuum and low pressure ＜ 0.2 bars / 3 psi / 0.02 MPa 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、The flow rate for gasses should be limited to ＜ 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube 、Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C 、Click here to learnHow to set up quartz/ ceramic tube and vacuum flange for STR-Tube Furnace. 、If you need faster cooling jar please click the picture below to order aPortable Spot Air Cooling Conditioner. 、Warning: Fast sample cooling can be achieved by sliding the heating chamber away. Please wear protective gears such as heat resistant suit amp; gloves if you intend to do so. DO NOT TOUCH THE TUBE SURFACE WHEN IT IS HOT

Operation Instructions

import(/layout/smh/menubottom.html);

可傾斜旋轉管式爐立式真空淬火爐高溫石墨化碳管爐立式淬火爐

真空氣氛電阻爐熱重分析爐石墨鋰電負極材料箱式氣氛爐硅碳負極預碳化爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考?？赡苡捎诟虏患皶r，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。